Shroud for a HEPA filter in the Carbon Box of a BentoBox Filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enables an 80x40x15 HEPA filter to be added to the bottom of the carbon box in the BentoBox filter
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 61
- Makes
- 0
- Views
- 688
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
The BentoBox filter for a Bambu Lab X1C or P1P is great for filtering fumes, but I was worried about carbon dust from the activated carbon pellets being blown into the printer, so I moved the 80x40x15 HEPA filter to the bottom of the carbon box. To ensure a snug fit, I made this shroud for the HEPA filter. Print 2 of them and clip them together inside the carbon box, then put the HEPA filter into it. It's a tight fit so that there's no air leaks and it all stays in place. Now you can pour in the activated carbon pellets and be confident that there won't be any carbon dust spread through your printer when the filter's fans are running.
Cheap HEPA filters are available on Aliexpress - search for “iLife Hepa Filter V5”