Orange PI 3 LTS Case remix with heatset insert screw closure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for orange PI 3 LTS that can be closed with screws, supports 3010 5V fan also
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 420
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like the original model for this but I wanted to be able to remove the cover without the little pins breaking and having to reprint it.
I also removed the small fins between the usb sockets because they were so thin they just broke off anyway.
I remixed this so that the cover is held on with 4 pcs:
M3 x 5mm OD x 4mm L heat set inserts as used in voron builds
and 4 M3 x 6mm Button head socket caps.
*******
Also added in step file and solidworks assy to make it easier for others to remix further.
I did not design the fastener models in the assembly they are from Voron 2.4 and are to be used as a reference only.
*******
Hope it helps someone else.