5 Gallon Bucket Hydro Tower For Smaller Print Beds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cut-down remodel of my 5-gallon bucket hydro tower. This is a remix to allow a smaller bed to be used.
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 287
- Wydruki
- 0
- Wyświetlenia
- 2277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This page will be dedicated to a cut-down version of my 5-gallon bucket hydro tower. I have uploaded all of the other tower files to this page, if something is a bit too big, let me know so I can work on it.
This will allow users to print the files with a smaller bed in mind and end up with the same result, a hydroponic tower that sits atop a 5-gallon bucket. This page will be updated the same as the others, if I make a file for the larger version I will create a cut-down/reconfigured version as well.
To start out, I have a couple of new files for the base piece that mounts to the bucket. The “X” on the parts goes together and the section with no “X” goes together they are not interchangeable at this time. They are labeled A and B in the file names. A total of six pieces will need to be printed to complete the ring. The files are based on my V3 version of the base piece, the newest iteration.