NASA Perseverance Plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The iconic plates installed on NASA rover, Perseverance, currently on Mars (but you can print yours ;) )
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 352
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Perseverance is the latest rover that NASA landed on Mars in a breath-taking sequence that we are starting to get images, videos and even sounds! Among the many scientific instruments and equipment, a couple of extra plates are part of Perseverance hardware.
This extra set of plates is composed by:
- Explore as One: Plate indicating our location in the Solar System also carrying the names of over 10 million people stencilled on silicon chips
- Perseverance Nameplate: Titanium plate with the rover name mounted on the robotic arm
- Mars 2020 Mission: Another titanium plate mounted on the rover's robotic arm with the mission name and mission identifier
You can read more about the "easter-eggs" that Perseverance is carrying here.
The models can be printed in a standard 200X200 mm buildplate using a 0.4mm nozzle. It is not recommended to downscale the model as some parts might become too thin (unless you are using nozzles of smaller diameter). For upscaling or downscaling a good tip is: with the model sitting flat on the surface, rescale only X and Y so you will not make the model too thin.
The model can be printed using Pause/Resume features from your slicer so you can change the filament colours. Best results achiever using layer heights of either 0.1mm or 0.2mm.