NASA Perseverance Plates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The iconic plates installed on NASA rover, Perseverance, currently on Mars (but you can print yours ;) )
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 48
- Makes
- 1
- Views
- 352
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Perseverance is the latest rover that NASA landed on Mars in a breath-taking sequence that we are starting to get images, videos and even sounds! Among the many scientific instruments and equipment, a couple of extra plates are part of Perseverance hardware.
This extra set of plates is composed by:
- Explore as One: Plate indicating our location in the Solar System also carrying the names of over 10 million people stencilled on silicon chips
- Perseverance Nameplate: Titanium plate with the rover name mounted on the robotic arm
- Mars 2020 Mission: Another titanium plate mounted on the rover's robotic arm with the mission name and mission identifier
You can read more about the "easter-eggs" that Perseverance is carrying here.
The models can be printed in a standard 200X200 mm buildplate using a 0.4mm nozzle. It is not recommended to downscale the model as some parts might become too thin (unless you are using nozzles of smaller diameter). For upscaling or downscaling a good tip is: with the model sitting flat on the surface, rescale only X and Y so you will not make the model too thin.
The model can be printed using Pause/Resume features from your slicer so you can change the filament colours. Best results achiever using layer heights of either 0.1mm or 0.2mm.