Charge Block Remix XT90 XT60 T Plug and JST
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the XT30, XT60, XT90 Charge Block by bwegner : https://www.thingiverse.com/thing:2630764 Because I…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the XT30, XT60, XT90 Charge Block by bwegner : https://www.thingiverse.com/thing:2630764
Because I don't have applications for the XT30 and the JST-SH Servo Plug, I removed these and added a T plug instead.
Also added an optional mid piece. I ran out of space when soldering... ;)
Another safety tip: use this cap on the T plug: https://www.thingiverse.com/thing:3191997
You will need to solder up some plugs and connect a positive and negative lead to your charger. Plugs were glued into the block one the short leads were soldered to the plugs. A 4.5mm hole was drilled thru the XT90 terminals for the connecting cable (See picture). you will need to take a bit of time and care with the soldering.
"NEVER connect more than one battery to the charge block at the same time."