Save icon keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A keychain for your keys to your location where you save your daily progress
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
You can either print both sides right away using the main file or you can print two separate sides. In both cases you will need to glue the two sides together.
Or if you feel up for the challenge you can print the full model standing on the cut corner side
Recommend to print it at the smallest available resolution, as this is quite a thin print.
For myself I just printed the one side, thickened to 2.5mm, as I don't like glued prints and I don't like prints that need supports. Printed with PLA at 0.12mm, 10% infill. Carried it for a few months, did not break, even though its so thin