1 / 4
Insex AND/OR Torx holder for Bondhus sets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Messured out a model to fit both sets from Bondhus. Fits nicely and with no problem to remove only the Torx.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
STL files for both the double and single holder
I printed it quite sloppy to save some time (will look and fit even nicer with 0.2 layerheight, but here is my settings:
Nozzle 0.6
Layerheight 0.35
layerwidth 0.6
Infill 20%
Can print with no support standing up
Material is optional, this is just unbranded PLA
Will fit every toolwall with 0.4-0.5 hole and with a 1.25mm spread between.
Thanks!