Liczymy pasujące modele…
I have seen a similar model that holds a different set of drivers. This is specifically for the Bundhus #10687 metric set from Amazon . I designed it to be printed in two pieces because at the time I wasn't 100% sure if it would fit on my…
I used these step files and added on the standard honeycomb storage wall hexagon. Use an “empty” insert to mount these to the wall. There is one size for the full metric bondhus kit and one for the full imperial one. I've also included…
I have made this model to conveniently hold your hex wrenches securely on your pegboard. Just print and attach with a M3-10 bolt and you and hang your Bondhus wrenches with pride. The nice thing about this design is you can take them all…
Introduction The original holder for Bondhus Metric hex keys wasn't available where I live, and I got tired of the tools always getting lost in the shop, so I designed a holder that can be attached to a Skadis system. It is designed to be…
Printing at .25mm layer height and 15% infill. I made two versions. And I'm not sure how to put into words the differences, but here goes: One with a plain honeycomb plug bit, that slides horizontally. Pro: can be easily removed, thus you…
Gridfinity Tray for Bondhus Hex Drivers - 6 Piece Set For this set - BONDHUS, BSX6MM BALLDRIVER HEX Set 1.5MM-5MM, 10686
This is designed to conveniently hold the 7-piece set of Bondhus balldriver Allen wrenches, my favorite tool. The size of each wrench is embossed on the side. Available through Amazon and others. Print at 50% fill or above, upside down.…
Designed this to hold my Bondhus hex drive set ( Amazon ). Will probably work with other sets, but have not tried them. Print the Hex Drive Storage file and Mount. The mount uses m3 inserts. Connect the two parts with 3 m3 x 10mm screws.…
Hello friends, These USA made Bondhus ball end wrenches are great quality and very competitively priced, however the supplied rubber holder which comes with them is a little loose for my liking and I had a near miss at work where a key…
WWall mount for Bondhus Metric T-Handle Hex Wrench Set. Adapted to use the DDD Printable Wall Control System ( github ). Uses one 2x4 Angle Bracket Inverted Flat Left and one 2x4 Angle Bracket Inverted Flat Right. Also needs the 4x10x8…
Introduction A holder made for Imperial SAE sized Bondhus T-Handle hex keys. It's made into 3 separate parts to not require supports, to use less filament, and for more structural rigidity. The 2 top parts are attached to eachother via M3…
An imperial equivalent tool holder for holding Bondhus drivers onto an IKEA Skadis pegboard. This model is mirrored and aligned with the remixed metric version to allow for nice side-by-side mounting as shown in the picture.
Use with 10999/BLX9M (red) and 10937/BLX13 (yellow) purchased together in pack 20199 BLX22. Unsure if they fit other sets.
This slots right into the Omniwall and the wrenches sit between the 2 arms. This Metric one holds 8 T-Handled wrenches. Print on its side with snug supports for the hooks in the OmniWall.
Multiboard holder for the popular 6-piece metric Bondhus hex balldriver set . Print without support (as depicted in the attached slicer screenshot), and attach to the board using 2 Multiconnect connectors .
This is a 2x4-grid holder for Bondhus 74686 metric hex ball driver set . This holder is compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and…
Print on its side with snug supports only for the hooks in the back. You can also add 8x3mm magnets if you would like.
I created this model to be “substitute" for the wall control pegboard that is used to mount the “ Hex Driver Peg Board Mount ” created by SafetyGlassesRequired I did not modify the mounts at all, just created this to hold the mounts as I…
Here is a Storage Case For Bondhus Ball End Power Bits. Ball End Power Bits (bondhus.com) I needed a storage case for these as the bags they came in were falling apart. Printed this on a Prusa Mini+, basically default PLA settings. 0.4mm…
A holder for the Bondhus T-handles sets where the tool can be retrieved from the top or front, allowing room for other tools around the holder. The holder can be assembled by through a sliding mechanism, it also features a French cleat on…
Holder is designed to be easily printed without supports and securely mounted to Skadis with T-Nuts Mounting System.
Holds your Bondus hex wrenches to your pegboard. I printed in PLA and it's been working fine. It's a bit of a tight fit but they slide in fine for me.
Holder for the Bondhus 34532 Set of 8 Stardriver/Torx Tools set (sizes T6-T25). When the Prusa XL and Mk4 started using Torx, I picked up this set from Amazon. Holder can be either mounted with standard #8 drywall screws, or there are…
STL files for both the double and single holder I printed it quite sloppy to save some time (will look and fit even nicer with 0.2 layerheight, but here is my settings: Nozzle 0.6 Layerheight 0.35 layerwidth 0.6 Infill 20% Can print with…
For strength, as the set is quite heavy, use at least 4 perimeters (with a 0.4mm nozzle) and 30% infill. If your shelf is not very sturdy and strong and can't hold a M4x25 screw, you can drill the holes through the shelf and attach it…
This is a hex shaped base for holding metric Bondhus Allen Keys. The side that holds the square end keys has a square edge, and then side that holds the ball end keys has a large fillet, so it's easy to know which is witch. Sadly the SAE…
Sizes 5mm, 4mm, 3mm, 2.5mm, 2mm, and 1.5mm are included. Holes are included for screws or there should be sufficient size on the top to use command strips to lock it in place. Not a lot more to say about a tool holder. If you have these…
Hex holder remix
Quick modification to let me use these screwdrivers in a little portable rack. I don't have the imperial set, but assuming the handles are the same size it should fit them too.
I was very happy to find @Furysamurai72 's holders for my Bondhus allen key sets, but I have a third set of keys with Torx ends. The size of the set holder and the spacing between the rows is a bit different, just as the metric and…
A gridfinity box for a Bondhus Gorilla Grip folding allen wrench set.
This is a holder for my toolbox that holds some older bondhs allen key screwdrivers
Opengrid holder for Bondhus 201999 Balldriver Allen Wrench sets. Includes a holder for both the metric and SAE set. Each holder uses 2 Openconnect snaps - https://www.printables.com/model/1559478-openconnect-opengrids-own-connector-system
Quick modification to let me use these screwdrivers in a little portable rack. I don't have the imperial set, but assuming the handles are the same size it should fit them too.
This is a 2x4-grid holder for Bondhus 74686 metric hex ball driver set . This holder is compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and…
Holder for the Bondhus 34532 Set of 8 Stardriver/Torx Tools set (sizes T6-T25). When the Prusa XL and Mk4 started using Torx, I picked up this set from Amazon. Holder can be either mounted with standard #8 drywall screws, or there are…
This is probably up somewhere else as it's an online tutorial on how to use Onshape. I wanted the wrench sizes added which is not in the tutorial so thought I'd share it here. Holds the 7 piece set well. Excuse the poor print quality in…
This is a shadow board gridfinity tray for a 3/32 Bondhus hex driver.
Took two pretty cool designs and merged them, leaving out the 2 bigger allen keys from the Bondhus 10686 Metric set
A satisfying snap for your Bondhus Hex wrench sets. Pivot case in out our for easy removal. For standard 1" pegboard
A companion piece to the original metric Bondhus balldriver holder for Skadis pegboards by Paul_295951, and the matching SAE balldriver holder by CinnamonToast Lunch. I use both of those, but I needed a matching holder to go in between…
Simple french cleat bracket to attach to the Bondhus T-handle stand
Ikea Skådis holder for metric and standard Bondhus hex wrench sets.
Bondhus Balldriver 6 Piece Set drawer storage organizer.
Allen pack pegboard mounts. As designed below:
Holder for Bondhus imperial hex wrench set with secure T-nut mounting using M3x12 screw.
Remix for Bondhus 6 piece balldriver set Category: Tool Holders & Boxes
Exceedingly basic remix of the original. Mostly just moved the screw holes to be exactly 3 inches apart so that it can be mounted to pegboard. Category: Tool Holders & Boxes
Simple table edge holder for the 7 set of Bondhus ball end drivers. Easy to find, easy to ID easy to put back (returning to an easy holder is the key for me, hate them rolling around the desk after use.. ) Print instructions Unassociated…
For strength, as the set is quite heavy, use at least 4 perimeters (with a 0.4mm nozzle) and 30% infill. If your shelf is not very sturdy and strong and can't hold a M4x25 screw, you can drill the holes through the shelf and attach it…
Used standard print setting with 20% infill and PLA filament. Printed upright with supports for the peg hooks.
Prints well with .6 nozzle, .3 layers and 15% infill.
This is a Bondhus metric driver set holder adapted for mounting on a lack enclosure. Bondhus 10687 Set of 7 Balldriver Screwdrivers, ProGuard Finish, sizes 1.27-5mm:…
Holder for 7-piece set of 1.27, 1.5, 2, 2.5, 3, 4, and 5mm ball end hex drivers from Bondhus.
This is a stand for the 6-piece Bondhus metric balldriver set with a gridfinity base. Fusion 360 and STEP source files are included. This model is a remix of something similar that was slightly larger and did not have the gridfinity base,…
Printed with transparent PLA with 0.3mm layer height Bondhus BD22199
I've been printing for years but recently started to look into doing my own CAD work. Thanks to Michael Laws' Teaching Tech tutorial with OnShape (see video below). I did “my own thing” because I wanted a wall-mount, not a shelf-mount,…
Tool organizer for Bondhus 10687 ball hex driver. Holds hex drivers 5mm, 4mm, 3mm, 2.5mm, 2mm, 1.5mm and 1.27mm. The bottom part is meant for ballast for added stability. I use 10 mm steel balls, sand and diluted white glue. Guide…
The major reason for this remix was to a simpler 2-color print. The original generates lots of filament changes due to the color layout and structure of the model. I have recut the model so there is only one swap from base to top color.…
2 racks for storing your T-handles. Made with Bondhus in mind but I imagine that all makes will likely fit. The holes for the keys are slightly snug at first (intentional) but once you insert the key and give it a twist the fit is…
I wanted to have my Allen keys available at all times, and when they annoyed me on my desk, I moved them to the wall. This model is only the holder. In addition to that part, you will also need two M2.5 Skadis-T-Nuts from the great system…
Holder for Bondhus Metric T-Handle Allen Wrenches. Designed to fit the 2, 2.5, 3, 4, and 5 mm wrenches from my set.
Couldn't find a good option for hanging my Bondhus allen wrench set on my pegboard, the options were either too big or required screwing things in. Um, the point of pegboard is so you can move things around and don't need to screw things…
Simple bin that fits a set of Bondhus allen keys with their holder. External dimensions W:57mm, D:35mm, H: 84mm. Prints with no supports. Additional necessary components You also need to print the right “peg” for your particular pegboard.…
Modified the Bondhus Ball End Driver holder for Multiboard ( https://www.multiboard.io ). I created a push fit version and a snap fit version. Recommended Print Settings Layer Height: 0.2mm Walls: 3 Infill: 15%
for Bondhus 10686 1.5-5mm Balldriver Screwdrivers, 6 Piece Set
WDNICK published a great gridfinitry tray for the metric set of these drivers and I wanted to create a partner for the SAE/Standard/Inch set. Fits Bondhus 10632 - set of 8, sizes .050-5/32-Inch. Amazon Link
![[ALCH] storage tray for Bondhus 74686 metric hex ball driver set (Modubox)](https://media.printables.com/media/prints/481552/images/3935827_11b0dcb4-8fa1-45fe-8bc4-fc1ada852903/bondhus.jpeg)
