1 / 2
Holder for Bondhus 13189 (T-Hex Ball) Set for 18mm shelf
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder can be screwed to/through a 18mm shelf and can hold all T-Hex Ball handles from the Bondhus 13139 set.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For strength, as the set is quite heavy, use at least 4 perimeters (with a 0.4mm nozzle) and 30% infill.
If your shelf is not very sturdy and strong and can't hold a M4x25 screw, you can drill the holes through the shelf and attach it with a M4x35 (or M4x40) bolt and nut.
Added a second version without the chamfer on the bottom for the mounting holes, to make using bolts easier.