Bondhus T-Handle Hex Key Metric IKEA Skadis Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An effortlessly usable holder for Metric Bondhus T-Handle hex keys, for use on IKEA Skadis systems
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 152
- Wydruki
- 2
- Wyświetlenia
- 1408
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Introduction
The original holder for Bondhus Metric hex keys wasn't available where I live, and I got tired of the tools always getting lost in the shop, so I designed a holder that can be attached to a Skadis system. It is designed to be as effortless as possible to use.
It's made into 3 separate parts to not require supports, to use less filament, and for more structural rigidity. The 2 top parts are attached to eachother via M3 screws, with the lower part being attached at a different point.
Required parts
For attaching the two upper halves
- 6 pcs M3 hex nuts
- 2 pcs M3x11 screws
- 2 pcs M3x7 screws
- 2 pcs M3x30 screws
For installing onto a Skadis system
- 4 pcs M4x15 screws
- 4 pcs M4 flange nuts, or regular hex nuts with washers
Print Settings
Printer Brand: Creality
Printer: Ender 5
Rafts: No
Supports: No
Resolution: 0.12
Infill: 95+%
Filament: Herz PLA NATO Green
Notes: Need to rotate the parts on the print bed to have the flat sides downward