Bondhus 8 Pc. Stardrive / Torx Drivers Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the Bondhus 34532 Set of 8 Stardriver Tools, sizes T6-T25. This can be attached either by magnets or screws.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Standard Digital File License
Holder for the Bondhus 34532 Set of 8 Stardriver/Torx Tools set (sizes T6-T25).
When the Prusa XL and Mk4 started using Torx, I picked up this set from Amazon.
Holder can be either mounted with standard #8 drywall screws, or there are holes in the back to glue in (6) 3mmx2.6mm Magnets.
Amazon US affiliate links below for both the tools and the magnets I used.
This was printed in Proto Pasta CF-HTPLA on the Prusa XL, however you can print with whatever you wish. I recomened if using screws, printing with 3 perimiters; 2 is fine if using magnets.
STEP file attached for anyone that would like to remix or adjust for different sets.
Bondhus 34532 Set
https://amzn.to/44ZnASx
Magnets:
https://amzn.to/3rIfEXy