1 / 1
Bondhus T-Handle Hex Key SAE IKEA Skadis Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An effortlessly usable holder for Imperial Bondhus T-Handle hex keys, for use on IKEA Skadis systems
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 738
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (23)Powiązane
Introduction
A holder made for Imperial SAE sized Bondhus T-Handle hex keys.
It's made into 3 separate parts to not require supports, to use less filament, and for more structural rigidity. The 2 top parts are attached to eachother via M3 screws, with the lower part being attached at a different point.
Made at user bdonkadoke's request
I also made a Metric version here
Required parts
For attaching the two upper halves
- 6 pcs M3 hex nuts
- 2 pcs M3x11 screws
- 2 pcs M3x7 screws
- 2 pcs M3x30 screws
For installing onto a Skadis system
- 4 pcs M4x15 screws
- 4 pcs M4 flange nuts, or regular hex nuts with washers