1 / 3
25mm spool holder for samla drybox
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned spool holder for 25mm diameter pipes or rails, fully compatible with https://www.thingiverse.com/thing:295332
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 83
- Wydruki
- 2
- Wyświetlenia
- 573
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (15)Powiązane
I used openscad to remix the spool holder model into something useful for myself. It's designed to hold 25mm pipes, but can be easily resized by changing the parameters in openscad.
- I removed the top lip of the holder, so that the pipe should just slide up and out
- The whole model is now slanted to account for the angle of the samla box wall (where before there only appeared to be a slant inside the opening for the pipe)
- There's a 5 degree and a 3 degree variation of the model. I used the 3 degree version with my 45L samla.
- I'm not exactly sure what the angle of the box is, or if it's different for each size of samla, but 3 degrees seemed good for me. Again it's easy to simply change the slant of the model and add more variations here, so let me know if you need anything different.
It should be 100% compatible with the plates and jig from https://www.thingiverse.com/thing:295332, same screws, same hole positions, same size