1 / 4
Anet A6/A8 upgrade: Filament Filter for 1.75, 2.85 and 3mm — zdjęcie 1
1 / 4

Anet A6/A8 upgrade: Filament Filter for 1.75, 2.85 and 3mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model I designed because sometimes I had some problems with humidity or dust that sometimes came into the…

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
227
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model I designed because sometimes I had some problems with humidity or dust that sometimes came into the extruder.

This model is for 1.75, 2.85 and 3mm Filament.

You will need to use this Filament filter all parts 1 time(FilamentFilter_Side_1 and FilamentFilter_Side_2 are the same but mirrord!). Also, you will need in total 5 M3 screws and bolts(2x ~10mm or larger).

Please feel free If you like this model and you want to support my work that I am making, you can donate me if you want with paypal: https://www.paypal.me/JordanHogetoorn

Print Settings

Printer:

Anet A6

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.15

Infill:

15%

How I Designed This

This model i designed in fusion 360 and slice it after that with Simplify3D to print it.

Category: 3D Printer Parts

Tagi