1 / 3
Working Comb Balisong
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to assemble and a fun toy to fling around. With the plus of always having good looking hair!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 852
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
This is a working comb balisong that I designed. It can be used for practice or just as a fun toy and cool comb to show friends.
I recommend these settings as it worked best for me
-Split the blade down the middle (Prusa slicer has this tool) and print on the flast surface then glue together after the print is done.
- Clone the pin as you will need both and I used a brim however you should maybe scale the pins down by 1% because I had a hard time pressing them in.
- I have a photo of the recommended orientation of everything
- Print with 100% infill for as much weight as possible.
- No supports are needed
And yes its Yoru's Balisong