Ender 3 filament guide no hardware
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a simple filament guide made to fit the original metal spool holder snuggly. also made to work with a z axis knob
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
a simple filament guide made to fit on an ender 3/pro (any printer with the same size and metal spool holder) without any additional hardware and doesn't interfere with a z axis knob.
this style of design is not new, however it is my take on it and the way that fit my ender 3 the best. I have forgotten the original design of this style of filament guide but it has been completely sketched and modelled from scratch with my specific needs and measurements so I think I can call it my own design on that aspect at least. it is also a bit longer than most filament guides to be able to have the spool holder more centered on the printer. it does mean it uses up a little more filament though.
fitment should be snug, if it is too tight you can shave off a little until it fits good.
should work with a 0.4 and 0.6 mm nozzle
leave a like if you found it useful :)
if you like my work, consider donating :)
https://ko-fi.com/jobis