Monkee Mods Nerf Firefly Extractor Claw - extended further
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Even longer extractor claw for the flawed Monkee Mods Firefly Blaster
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The original two designs of the Monkee Mods / Colonel Wasp Nerf Firefly Blaster had a press-fit barrel and breech assembly, with the breech swelling up with time and causing the shells to sit too snug and too deep inside it.
This is a tiny remix of @MeinGonk_481445's extended claw that was still a bit too short in my case, so I extended it by another mm (in the middle of the ramp pushing against the spring to not deform anything else).
Please note that you will most likely have to file down the notch where the extractor sits to ensure the breech closing and sealing properly.