DNL Sencor Scooter 2020 Mudguard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mudguard for the Sencor Scooter 2020 e-scooter
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 185
- Wydruki
- 3
- Wyświetlenia
- 1007
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NON COMMERCIAL USE ONLY. If you intend to print this commercially, please contact me for licensing.
Mudguard/fender for the Sencor Scooter 2020 e-scooter. Might work on other models as well, I'd be very happy if you tested it out and let me know.
The mudguard is supposed to be a bit more durable than the original one that's quite prone to breaking. This one has also incorporated footrest, so that's cool I guess. The model has not been tested much yet, so any feedback is welcome.
You'll have to pull back light electronics & cover from the original mudguard. Also you'll need:
- 2× M5×16 screw & nut for joining the parts together
- 3× M4×16 screw & nut for attaching the mudguard to the scooter (you can use original nuts, but the screws need to be longer iirc)
Supportless print, printed with PETG, .6mm nozzle and .8mm extrusion width.