Snap Fit Cases Remix for I2CDriver and SPIDriver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed I2CDriver and SPIDriver snap fit cases.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 57
- Wydruki
- 2
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I've remixed the cases quite a bit to allow them to snap fit together without any glue or external parts. Also I've provided the option of having inlayed logo/labels for each device.
Print Instructions
For tops, print with screen opening side touching build plate. Corresponding bottoms print like normal. No supports will be needed.
Printed with standard 0.2mm settings except I have initial layer speed set to 10mm/s.
Here's my process for Inlays
- Place both the top and the corresponding inlay text in the slicer and line them up. (might have to mirror the inlay text to get it lined up)
- Delete the top out of the slicer and save that G-code.
- Ctrl-Z the top back into the slicer and then delete the inlay text model. Now save this as a separate G-code file.
- Print the inlay text model and when it finishes, leave it on the plate and make sure to keep the build plate hot. Change out filament.
- Print the top in the new filament.
- Enjoy!
Notes
It may take a bit of effort for the top case to snap in. I find it helps to use a little wedge like to to pull the walls every so slightly so the clips can snap into place.
Products
You can find Amazon affiliate links to these serial device drivers below as well as find out more about them from the creator's website.
I2CDriver
SPIDriver