Ender 3 Logitech B905/C905 webcam mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a thing to mount a Logitech B905/C905 webcam on the Z-axis of an Ender 3.
The design is somewhat based on/inspired by the camera mount by Flapstaart on Thingiverse, except it is installed on the Z axis directly instead of being clamped on it. The old design did no longer work for me since I've treated my Ender3 with a direct drive upgrade.
Print hints
Print webcam-mount sideways with the long arm on the bed --> no supports required. webcam-mount-screw doesn't need any supports either.
Printing with PLA at 0.20mm layer height works fine.
Installation
Screw the webcam-mount-screw onto the webcam (you might need to remove some cover on the back to unveil the screw).
For now install it on the Z axis by using double-sided tape. It's not pretty but it works ;-)
I used a M4x14 screw and nut to hold the two parts together.
OpenSCAD sources are available at: https://github.com/nilsding/DDDobjs/tree/main/webcam-mount