FireBoard Spark Protective Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple magnetic case to protect your FireBoard Spark thermometer
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I present to you a handy storage case to protect your Fireboard Spark when not in use. This case does not require any supports and uses 8ea. 6mm x 2mm neodymium magnets to keep the case shut.
I suggest using PETG, however PLA or any other material will work fine. Due to PETG’s low bridging capabilities, you can orient the layer covering for the fire logo in such a manger to add texture within the flames. Maybe even print with a color layer change for additional effect. If you do, please post a “make”!
Enjoy!
.04 Nozzle
.20 Layer Height
25% infill (could go less with PLA)
No Supports
Magnets vary in size, but a dab of glue will hold them in nicely. I recommend Beacon 3-in-1 over superglue.
Important! Get the polarity of the magnets on the top and bottom case correct before gluing them in so that they attract and not repel each other.