Rack mount for the Keyestudio W5500 Ethernet Development Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A module for the Keyestudio W5500 board to be mounted in the 19" DAP 2U rack frame.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A module for the Keyestudio W5500 board to be mounted in the 19" DAP 2U rack frame.
To use the front plate you have to remove the power jack of the board.
The front plate has three 3mm holes for LEDs.
Use M3 screws to mount the board (would recommend nylon screws so you don't short anyting) and attach the front plate.
Print instructions
Category: Electronics Summary
A module for the Keyestudio W5500 board to be mounted in the 19" DAP 2U rack frame.
To use the front plate you have to remove the power jack of the board.
The front plate has three 3mm holes for LEDs.
Use M3 screws to mount the board (would recommend nylon screws so you don't short anyting) and attach the front plate.