Rack mount for the Keyestudio W5500 Ethernet Development Board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A module for the Keyestudio W5500 board to be mounted in the 19" DAP 2U rack frame.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 29
- Makes
- 0
- Views
- 455
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A module for the Keyestudio W5500 board to be mounted in the 19" DAP 2U rack frame.
To use the front plate you have to remove the power jack of the board.
The front plate has three 3mm holes for LEDs.
Use M3 screws to mount the board (would recommend nylon screws so you don't short anyting) and attach the front plate.
Print instructions
Category: Electronics Summary
A module for the Keyestudio W5500 board to be mounted in the 19" DAP 2U rack frame.
To use the front plate you have to remove the power jack of the board.
The front plate has three 3mm holes for LEDs.
Use M3 screws to mount the board (would recommend nylon screws so you don't short anyting) and attach the front plate.