Mass airflow housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mass airflow housing for use with Hitachi Mass Air Flow Sensor: MAF0034 to create a custom air intake system for a car
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 618
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
!!!! All holes are not threaded. Designed for M3 threaded insert from mcmaster-carr (94180A333). !!!!
This is a mass airflow housing designed to accept a Hitachi Mass Air Flow Sensor: MAF0034 to create a custom air intake system for a car or truck. The breather tubes are for the PCV valve and are 3/8". If you are using the breather tube with the housing you will need to apply a gasket or RTV. Screws/bolts should not exceed 10mm and should not be under 8mm in threaded length.
For your material choice I recommend something that has a HDT (heat deflection temperature) of above 130 degrees C @1.8Mpa and is not nylon (PA) based due to creep. Bambulab PET-CF in particular is great.
Maf 5-2 Made it easier to get a filter on