Mass airflow housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mass airflow housing for use with Hitachi Mass Air Flow Sensor: MAF0034 to create a custom air intake system for a car
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 101
- Makes
- 0
- Views
- 618
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
!!!! All holes are not threaded. Designed for M3 threaded insert from mcmaster-carr (94180A333). !!!!
This is a mass airflow housing designed to accept a Hitachi Mass Air Flow Sensor: MAF0034 to create a custom air intake system for a car or truck. The breather tubes are for the PCV valve and are 3/8". If you are using the breather tube with the housing you will need to apply a gasket or RTV. Screws/bolts should not exceed 10mm and should not be under 8mm in threaded length.
For your material choice I recommend something that has a HDT (heat deflection temperature) of above 130 degrees C @1.8Mpa and is not nylon (PA) based due to creep. Bambulab PET-CF in particular is great.
Maf 5-2 Made it easier to get a filter on