1 / 2
90 Degree turned LTT screwdriver + Bit storage holder for Skadis
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I mount my skadis board rotated 90 degrees so I had to rotate the holes from the original so it could fit.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I mount my skadis board rotated 90 degrees so I had to rotate the holes from the original so it could fit.
