Remotes Holder for AppleTV and TV
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple design to fix a holder on a shelf for remotes : Apple TV and TV Thickness is 3mm for robustness. Two M8 screws…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple design to fix a holder on a shelf for remotes : Apple TV and TV
Thickness is 3mm for robustness.
Two M8 screws are included in the back of the holder.
It has to be printed vertically (with supports), I know it's not the best for the screw parts but it works.
Before printing the holder, you can print the Screw-Test (Screw-Try_vertical_print.stl) vertically with support and a nut in order to see if it works with your settings.
The design was made in such a way as to force a little bit for screwing
Print Settings
Printer:
Sidewinder X1
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament:
Giantarm PLAGrey
Category: Organization