Laundry Splash guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A splash guard designed to catch any drips and splashes out from the dispenser of your laundry detergent/fabric softener
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 119
- Wydruki
- 1
- Wyświetlenia
- 690
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A splash guard designed to protect your walls from detergent or fabric softener that splashes out from dispensing.
Designed to be a compressive fit on Tide and Downey bottles, but may fit other brands, the diameter of the opening is 1.69" for a tight fit.
Printed at .20 layer height
20-25% infill is recommended.
printed with PETG/PLA/PLA+
supports are required, I printed mine lying flat and only allowed supports to support the setback, and the arch. although the arch should not need supports.
2 models provided, one with a .5" setback and one with a .7" setback for slightly deeper overhang of the spout.