Laundry Splash guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A splash guard designed to catch any drips and splashes out from the dispenser of your laundry detergent/fabric softener
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 119
- Makes
- 1
- Views
- 690
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
A splash guard designed to protect your walls from detergent or fabric softener that splashes out from dispensing.
Designed to be a compressive fit on Tide and Downey bottles, but may fit other brands, the diameter of the opening is 1.69" for a tight fit.
Printed at .20 layer height
20-25% infill is recommended.
printed with PETG/PLA/PLA+
supports are required, I printed mine lying flat and only allowed supports to support the setback, and the arch. although the arch should not need supports.
2 models provided, one with a .5" setback and one with a .7" setback for slightly deeper overhang of the spout.