1 / 4
magnetic feet for boards with m2.5 bolts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
magnetic feet boards like raspberry thas uses m2.5 bolts magnets 6x2.5mm
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
magnetic feet for boards with m2.5 bolt holes
magnets used 6x2.5mm
printed with 0.1 layer height
if the clip gets damaged you can still use it by melting a little bit to stuck it in place
use supports only on plate
any material i used ASA 275 and worked perfectly