1 / 1
Avionics Sled for Der Big Red Max 3in Nose Cone - Eggtimer Quantum Rev. C1 (UPDATED) — zdjęcie 1

Avionics Sled for Der Big Red Max 3in Nose Cone - Eggtimer Quantum Rev. C1 (UPDATED)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mod to the Avionics Sled for the Eggtimer Quantum flight computer Rev C1

Ocena
0 / 5
Polubienia
5
Pobrania
28
Wydruki
0
Wyświetlenia
256
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

05/20/2023: Updated - The stand-offs were a bit off, so I moved them to the perfect location.  Also, when using an eyehook for the shoulder of the nose cone, there isn't enough clearance so I adjusted this.  This now incorporates 4 versions for the Eggtimer Quantum: standard single, standard duel, cut-out single, and cut-out duel

---

The sled that was originally posted is a perfect canvas to customize any avionics you want within.  I added two configurations:

  • Single Eggtimer Quantum that can accommodate 1-2 2s, 7.4 LiPo batteries
  • Dual Eggtimer Quantums with 2-4 batteries

Each flight computer can use 2 batteries, one for flight telemetry control and one for powering deployments.  The latter configuration would be used in Level 3 HPR for redundant deployment configurations.

Should work with either the Estes Der Big Red Max 3in or Loc/Precision 3in nose cones posted by @Arogen67

Tagi