MicroSwiss All-Metal Adaptor for Bondtech DDX V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple adaptor for Bondtech's DDX V3 to MicroSwiss All-Metal hot end.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
As I was swapping the original MicroSwiss hotend from my printer, I realized that the all-metal replacement wouldn't work as the heatsink from the stock microswiss hotend is different than the all-metal version.
This model was made directly from the original from bondtech, and then slightly modified to fit the new hotend. They do sell these but I don't see why you need to buy one when you can make it yourself.
** note ** you may want to print this out of something with a higher vitrification temperature than standard PLA. ABS or ASA would be ideal, but PETG is also better than PLA.