Liczymy pasujące modele…
This is a very simple two-piece pan/tilt gimbal for a Caddx Nebula Nano (the standard camera shipped with most Vista kits) or any other 14mm wide camera, a standard-sized 9g pan servo (ideally one with 180° of rotation or more), and a…
Just a simple mount for the Walksnail VTX and new Caddx GM3 Gimbal that you can use or modify to fit your needs. It has an additional mount for 40mm cooling fan, because the Moonlight VTX heats up very quickly without an active airflow.…
Milwaukee Installation Drill/Driver (FDDX) Wall Mount. Milwaukee_FDDX_wall_mount_2ah Pictured model. Milwaukee_FDDX_wall_mount_4-6ah Extended 3 mm to fit 4ah + 6ah batteries. Note: Designed for M5 counter sunk screws. Video link:…
CaddxFPV Walksnail Moonlight VTX Mount for TBS Source One V5 Made possible with @Dtuned_2160698 Features: Full protection of the Moonlight Support dual antennae setup Cutouts for port access Slit and zip tie step for easy and flexible…
In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…
fits the following Walksnail Avatar Caddx cameras with 14mm camera lens body Walksnail Avatar HD Nano Camera V3 Walksnail Avatar HD Mini 1s Lite Camera Walksnail Avatar HD Micro Camera Walksnail Avatar HD Pro Camera Walksnail Avatar HD…
Camera mounts for: Tiny Whoop FX965TW Pitch (11mm x 11mm) Foxeer Pico (12mm x 12mm) Caddx Ant (14mm x 14mm) FPVCycle 199C (12mm x 14mm) I've printed the 30 degree mounts without supports. The top bridge is the hardest, it may need to be…
There are two fan shrouds, i have modified. DDX_Fan_Shroud_5015 This is a mod from a non-v3 version into a v3 mount version. You need two M3x20 screws to mount the fan to the shroud and a M3 nut for the DDXv3 mount. DDX-V3_Fan_Shroud_5015…
Printed from ABS or PETG for optimal strength. Friction fit to the camera lens and body. Adapted the design to fit on the Walksnail Pro Camera or any other 14mm camera. Simply cut it to length for shorter lenses like on the original cam.
Strongly inspired by the very effective design of ngn33r: https://www.thingiverse.com/thing:4859251 other cam sizes & angles can be updated in the provided F360 files.
Hey Here are some mods to put cable chains on ender 6 10x20 chain link here : https://urlz.fr/hDxF Source : https://www.thingiverse.com/thing:5212300 https://www.thingiverse.com/thing:5225246 enjoy :)
A small adapter clip to screw a Caddx Ant Lite into a Mobula6/7/8 canopy using M2x4 screws and M2x3 heat inserts. M2x3 heat inserts from cnckitchen Be careful while melting the inserts in as the plastic walls are very thin. I added a…
Flexible material only (Filaflex40)
This is mount for Caddx Ratel 2 onto ImpulseRC APEX frame. It requires only two m2 4-5mm screws to secure camera itself I have printed this in PLA and it fits just right
This video is a complete walkthrough for the Bondtech DDX extruder upgrade for your Creality 3D printer. I am also installing a Slice Engineering Mosquito Magnum hot end with 50W heater cartridge and 300 degree thermistor. This…
Based on the model posted by MrShutterBug on Thingiverse.
enclosure for the Caddx Vista that can be additionally secured with m2 nuts and bolts to the mount, meant to be positioned on top of a 30x30 stack feet/spacers height is 3mm, the holes are intentionally a tight fit to keep it in place…
This is a small print with fine details - use the highest quality you can and 100% infill Replacement bracket for the Walksnail VRX mounting bracket which is prone to break at the mounting screw. Rafts: No Supports: No Resolution: High…
Remixed for the Caddx Vista. Use m2x16 screws w/ nuts to hold the vista down. I added extra holes for mounting options. Remix from https://www.thingiverse.com/thing:4775067
Pied en deux parties pour une meilleure stabilite Print Settings Printer: FL Sun Q5 Rafts: Yes Supports: No Filament: GT 3D Makers PLA Category: Machine Tools
Hello, This is an XT60 holder for an TBS Source One Frame with or without the original Caddx Vista Antenna. I designt his because i often got the cable from my XT60 plug into my props. First i used the original Caddx Vista Antennamount…
This case turns the Caddx Vista DJI Digital FPV Air unit into a self contained FPV pod that can be attached to any RC aircraft or ground vehicle. I use Velcro to attach mine to RC planes.This allows me to convert just about any plane to…
When printing the nose i laid it on it's back. Uses a lot of support but it makes for a smoother looking print. I imagine someone can cutoff the cape type thing i have on the nose to make the transition to the fuse a little smoother. Up…
This is a mount for 19mm cameras. Its still not completed NEW UPDATE: Added v2 where camera is moved a little bit forward Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution:…
UPDATE 19/12/23: Dual antenna VTX mount added This model allows a Walksnail VTX to be mounted in a 30.5x30.5 hole spacing while not requiring any screws to mount it. The top folds over the VTX and locks in on itself to secure the vtx in…
This is a remix of the original Bondtech DDX v3 for Creality BL-Touch mount to also mount an ADXL345 Acceleromenter for klipper input shaping tuning. I printed this with tree support touching build plate only. Print Settings Printer…
Standoff spacing is 21mm. Standoff height is 28mm if your frame is not the nazgul and you want to match it. This mount was meant to reduce vibrations caused by the antenna, so I printed mine with PETG. It is very stiff and doesn't flex,…
This is a mount for the newer version of the Caddx Vista antenna. You can remove the tube and run the antenna coax through the hole. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 20…
Base Plate & Roll-Cage parts made of ASA for CADDX GM3 Gimbal to be mounted on an AOS frames, model UL7 and probably Cine35 EVO . To check if it will fit other frames before printing everything, just print the “base” piece…
Parts from Bondtech designed around/used: 1x M3 Square Nut 1x M3x10 Button Head Screw Note that this IS NOT designed for the original DDX; if you're looking for a 5015 shroud for your DDX, Bondtech provides an STL for that on their…
This canopy is based on the work done by Slavik Nychkalo (https://www.printables.com/model/812479-tinywhoop-canopy-runcam-nano-3/related). I was looking for a new light canopy for a project and I liked his model, but his model was for a…
This model is adecue for Caddx Polar Vista
Ant Lite Canopy
The only Caddx Peanut Mount you'll ever need Designed this to be highly protective AND easily removable. A difficult balance but I think I got it down. It protects the lens as much as absolutely possible without getting in the image. It…
A small connector that allows the VRX mount to be connected to a GoPro mount Print Settings Printer: Elegoo Neptune 3 Pro Rafts: No Supports: No Resolution: High Infill: 100% Filament: esun PLA Black Category: R/C Vehicles
Rough 3D model of the Caddx Ant Lite for designing frames or testing fitment. Designed in blender and dimensionally accurate.
A GoPro mount for the Caddx Peanut
This is a two part body that alllows the use of the Foxeer Wildfire cover by LordKokosnuss https://www.thingiverse.com/thing:5814297 Download file includes the above cover. It does require the base to be superglued to the main body so…
Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Attach VTX to the Body with 4* M3x4 or M3x6 screws. The Cam-Top attaches to the Body with 4* M3 screws. Camera attaches using…
I remixed one the original models for the 4010 fan for the Ender-6 as the cooling ducts were not central on the mosquito hotend, once duct two ducts were close but the third was offset by quite a way. This one better suits the Ender-6…
Made this cage a while back to protect the vista fron chopped grass and sticks that might try to get into the vista, didn't have much problem printing, onse side has cuts to allow to pull down and connect a usb cable.
Canopy for Caddx Ant Lite with 15° angle.
Fixed angle TPU mount for Gopro Session, Caddx Orca and Caddx Walnut on GEPRC Mark5 FPV drone frame. To be mounted without the carbon plate. Camera Angle: Choose the file for your preferred angle. Dm me or comment for custom angles, I can…
Parts for GeprRC Mark5D (o3 version) version for walksnail b1 b2 version for caddx vista b1 b2 GPS size 15x15 (M100 mini Hglrc) UPDATE mark5_walksnail_b1_2_only_ws_v1 - version for walksnail vtx v1 (two antennas) Print Settings Printer…
A redesigned nose for T2 Cruza to fit the CaddxFPV GM3 gimbal.
Update 8/1/2025: V47 has the same hole spacing as the original. It also has a new internal rib to try to reduce warping from the heated bed. Update 3/10/2024 : V43T has the same clearances as the original Bondtech version and should fit…
I didn't like the original camera mount on the Flywoo Explorer, therefore I designed a new camera mount. Print in TPU. Will fit Caddx Nebula Pro and probably other 19x19mm cameras.
GEPRC Mark 4 support antennes CADDX et RX en TPU. Antenne CADDX style Cherry. 2 petits trou à la base pour enlever facilement l'antenne. Bon print ;-)
A little Stylish rework of the canopy for the caddx ant (i actually redesigned it from the ground up, but i made it to be the same shape) with some slots to be colored with nail polish. that is a bonus if you care for color matching your…
Re-drawn https://www.thingiverse.com/thing:4882164, with slightly tighter fit and a steeper camera angle.
Leichter Schutz für die Starlight, es ist für den TPU Druck gedacht, und gezeichnet
3mm high spacer with underneath wire "cavity" (2x10mm), yes the file it's flipped upside down for print ease Category: R/C Vehicles
Antenna holder for the stock caddx vista unit on the micro apex frame.
Print in TPU with the side with the camera tab facing down and the wider edge facing up. 25-degree uptilt Caddx ant lite camera mount for the AlphaRC 75mm carbon frame. Should work for other frames with 18mm spaced standoffs.
I made this from petg. Perfect fit for caddx drone. No clip for cover only tension of material, can be adjusted by extrusion if needed but on bambu x1c is perfect. You can print only one color and logo should be not visable.
Material: TPU Support: Tree / Organic fits normal 8cm caddx vista antenna and happymodel ep1 antenna
Print in tpu Category: R/C Vehicles
Good day, all! We all love the quality of our DJI FPV setups, right? But it's expensive to put a Vista or Air Unit in every single plane you own (assuming you can find one in stock). Meanwhile, lots of molded FPV wings, like the…
I made this frame after creating my 1S frame and decided to experiment more with a more powerful 1S/2S size. After so many iterations finally it is here. The cam and VTX mount should be printed but the main frame should be made of Carbon…
Hey pilots, this is little design of Lens Cap for FPV drone camera Caddx Ratel 2. Have you ever lost the original camera cover? You can print it many times again. If you would like to support my designs to give me a small tip, click on…
Simple carrying case for the GoFilm20, fits perfectly, no rattling. You will need 6x M3x20 screws. Print everything without supports, use TPU or similar flexible material for the seal (you can also just use it without the seal as well).…
This is set of elements to replace front ALU part and mount caddx GM2 gimbal. For the mod You need: M2x10 screw 2pcs (or M1.4x6 if do not want to drill out threads to 2mm dia) 4 silicone dampers - dimensions as shown on pictures -…
Can be used with any 14mm RC cameras. Print with soft TPU. I recommend to print two or three at once (even if you need only one piece), because of possible insufficient cooling and fast print time Tested on: Caddx Ratel 2 Caddx Ratel Pro…
As I was swapping the original MicroSwiss hotend from my printer, I realized that the all-metal replacement wouldn't work as the heatsink from the stock microswiss hotend is different than the all-metal version. This model was made…
Just put a Caddx Vista unit together with a 30x30x6mm fan and a 5V regulator into a special designed housing to be used as a standalone unit for applications without guaranteed cooling and flight controller, e.g. into the hull of my FPV…
Pulled out the antenna and fold it for better storage. Use 2 zip ties through the hole (1mm) and secure the tbs crossfire antenna
I have a small form factor version as well. Get it here . Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Screw VTX to the Body with 4* M3x4 or M3x6 screws. The Cam-Holder…
Pan cameramount that also holds the vista. It fits in the reces of the FPV canopy of the AR wing Pro. also secure the canopy in some way, else you will lose it! its operatred with a normal 9g servo. the Clamp part goes on the inside of…
The mount for the Walksnail VRX is prone to breaking, if you don't want to replace it or don't intend to ever use it this print provides an infill so that you're not left with a gap in the top of your VRX If you're looking for the…
Strain relief for mounting on back of Bondtech DDX v3, designed to fit against Ender 3 x-carriage plate. Slots to slide in m3 nuts inside the front cover. Onshape document:…
Replace your fan shield with the orginal 4 screws and hold the caddx avatar vrx.
Adapter created to allows use of the E3d Revo CR hotend with the Bondtech DDXv3. Printed top down with snug supports used for build plate. 0.4mm nozzle, 0.2mm layer height, Prusament PETG default profile. Used the bondtech guide to cut…
null Print Settings Rafts: No Supports: No Infill: 20 Filament: Saintsmart TPU Category: 3D Printing
Little backpack for impulse-rc apex for crossfire gps and caddx vista antenna no support needed tpu 100% infill if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv…
The antenna mount can be bend upwards with a heatgun or a lighter
Designed a cases for standalone Caddx Vista Nebula Pro to mount on my rc-car. Same size like GoPro Session 5. Printed in TPU 98A.
Antenna Mount for the original Caddx Vista Antenna for Chris Rosser's AOS 5 V2 frame
A glide friction fit antenna holder for the caddx vista. I recommend heating it with a heat gun at like 170c for around 30 seconds to soften up the plastic so you can shove the antenna in and then it will shrink down onto the antenna when…
This canopy was created for use with the X-knight frame, but can also be use with the Twig XL. It allows for the use of a naked DJi vista and caddx polar camera.
I use a Matek F411 WSE and a Caddx Vista, and fly a 4s 850mAH battery in my ZOHD Dart 250g. I try some variants to put all together and get the CG in the right position, but nothing satisfied me. So i build a Mount for the FC and the…
Mounting frame for the Caddx Vista antenna lollipop style. The antenna come with the drone but there's no mounting option for it. You will need two self taping screw or an M2 screw/nut. Total additional weight is 1gr.
For 4mm standoffs. Works well for my FlexRC Skyhopper. Category: R/C Vehicles
Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Attach VTX to the Body Lite+ with 2 of the short screws included in the kit. The Cam-Top attaches to the Body with 4* M3…
a canopy canopy for the Ant Lite designed to hold the cam at different angles (15°-45°). Multiple versions
VTX antenna holder for original Caddx Vista antenna for Lumenier QAV-S. Print in ABS or PETG Also look at my other QAV-S models: QAV-S Skids https://www.thingiverse.com/thing:6121858 QAV-S Stack Protectors…
Some space were left so that the lense would not touch the cover directly. Enjoy!
Spacer for naked Caddx Vista Print with support.
CADDX Ant Nano Mount Camera mount for ZOHD Drift
An improved version of the red pod and made for the nebula pro instead of full dji camera. Uses long metal m2x16mm screws to screw the vista down. Cuts in pics not needed for USB-C port, this has been fixed in uploaded versions. M3 Screws…
Mount for the Caddx Vista or Runcam Link in the front of a Diatone Ripper / HEE Wing F-01. Single Mount for the Vista an the Camera. It's designed as a Drop in, so you can switch it to different Models. Fit's in my ZOHD Dart 250g to. Two…
This mount will help you secure antenna from caddx vista to AlfaRC Fi-115 frame. Print with tpu for best results.
18mm remix of Bondtech DDx EZABL clamp mount for CR10 by mverive. thing:4571423 Notes: PLA will work but PETG or better is proffered. Just like the original, you will need 2ea M3x12 and 2ea M3 nuts. Print instructions Rafts: Doesn't…
Print in TPU or PETG for the mid part that is in contact with the hot Vista unit. Print the mid section upside down with the curved surface facing up. Support is required, but that is easily broken off. Print with 0.1mm layer height, for…
Small lightweight Caddx Vista antenna mount for the lumenier QAV-S 5'' quad. Printed in TPU with a 0.2mm layer height, 20% infill, no supports needed. Antenna is mounted with two M2 x 8 screws and two lock nuts. Print Settings Rafts: No…
Must be printed with TPU or other soft material.
Printed in TPU, Lenscaps that protect the lens during transport but don't touch the lens itself. Printed in TPU 95 Shore. If to tight or to loose for your lens, just scale the model a few percent in your slicer.
Glue on with a strong glue like E6000 in place of the stock front and rear vents. You'll need an M4 bolt and nut for the mount. The Insta360 Go 2 mount is pretty tight. May be worth slightly upscaling it. Peanut mount is pretty good…but…
GPS and antenna mount for the FPVCycle Glide frame for the Caddx stock antenna and BN-880 GPS unit
