Caddx Walksnail VTX foldable mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Foldable mount for the Caddx Walksnail VTX to allow easy moving between models without needing to unscrew the VTX
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 981
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 19/12/23:
Dual antenna VTX mount added
This model allows a Walksnail VTX to be mounted in a 30.5x30.5 hole spacing while not requiring any screws to mount it. The top folds over the VTX and locks in on itself to secure the vtx in place. This also allows the VTX to be easily removed and moved to another model if you wish.
Weight of VTX holder is approx 8g.
There are separate mounts designed for the V2 VTX and Dual Antenna VTX, which are slightly different, so please make sure you choose the correct mount.
This print needs to be printed in a flexible filament (so it can be folded), I am using 95A TPU and have used 25% infill for print speed. At 30mm/s speed and 0.2mm layer height it prints at just under 2h with a 0.4mm nozzle using my slicing settings.
I have also designed a holder for the USB cable which uses the same mounting screws to hold the USB adapter by sliding it in from the top.
Weight of USB mount is approx 1g, around 20mins to print using my print settings.
The design is inspired by the various antenna mounts made by Haku3D (Haku3D Designs - Thingiverse).