Magnetic Shoelaces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a flat section on a pair of Magnetic Shoelaces so you can add your favourite icon or your initials!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a flat section on a pair of Magnetic Shoelaces so you can add your favourite icon or your initials!
The magnetic shoelaces work great plain.
8 magnets are required for each shoe. 3mm diameter x 3mm thick Neodymium 0.29kg pull (they can be found on a number of online stores.
The magnets are a tight fit and may require a blunt instrument to push them in all the way.
I have super glued the magnets in place. I suggest doing one side first and then checking the orientation of the other side so when glued all magnets will attract and not repel!
Re the bridging block I have added the letter G on one side of the magnetic shoelace this is to show the side I would glue the block into.
Print instructions
No support is required.
I have made prints in both 0.15mm and 0.2mm layers.