Diamond hotend mount for the E3D BigBox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Diamond hotend mount with a BLTouch sensor for the BigBox.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a Diamond hotend mount with a BLTouch sensor for the BigBox.
You will also need the "Fan Shroud" from SpoonUnit --> https://www.thingiverse.com/thing:1869814
And the "Diamond_hotend_shield_no_mount" from kharar --> https://www.thingiverse.com/download:1680390
You will need to buy a 50mm x 50mm fan for cooling the Diamond Hotend and a 40mm x 40mm x 20mm blower fan. Both can be bought for pennies at Ali or Ebay.
Print instructions
Category: 3D Printer Parts Summary
This is a Diamond hotend mount with a BLTouch sensor for the BigBox.
You will also need the "Fan Shroud" from SpoonUnit --> https://www.thingiverse.com/thing:1869814
And the "Diamond_hotend_shield_no_mount" from kharar --> https://www.thingiverse.com/download:1680390
You will need to buy a 50mm x 50mm fan for cooling the Diamond Hotend and a 40mm x 40mm x 20mm blower fan. Both can be bought for pennies at Ali or Ebay.
Print Settings
Printer Brand: Prusa
Printer: Prusa Clone
Rafts: No
Supports: Yes
Resolution: 0.25mm
Infill: 45%
Notes:
Use supports where necessary.