Diamond hotend mount for the E3D BigBox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Diamond hotend mount with a BLTouch sensor for the BigBox.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 335
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a Diamond hotend mount with a BLTouch sensor for the BigBox.
You will also need the "Fan Shroud" from SpoonUnit --> https://www.thingiverse.com/thing:1869814
And the "Diamond_hotend_shield_no_mount" from kharar --> https://www.thingiverse.com/download:1680390
You will need to buy a 50mm x 50mm fan for cooling the Diamond Hotend and a 40mm x 40mm x 20mm blower fan. Both can be bought for pennies at Ali or Ebay.
Print instructions
Category: 3D Printer Parts Summary
This is a Diamond hotend mount with a BLTouch sensor for the BigBox.
You will also need the "Fan Shroud" from SpoonUnit --> https://www.thingiverse.com/thing:1869814
And the "Diamond_hotend_shield_no_mount" from kharar --> https://www.thingiverse.com/download:1680390
You will need to buy a 50mm x 50mm fan for cooling the Diamond Hotend and a 40mm x 40mm x 20mm blower fan. Both can be bought for pennies at Ali or Ebay.
Print Settings
Printer Brand: Prusa
Printer: Prusa Clone
Rafts: No
Supports: Yes
Resolution: 0.25mm
Infill: 45%
Notes:
Use supports where necessary.