1 / 4
Tarmo5 Skull Body Reinforced (without or with FPV cam) — zdjęcie 1
1 / 4

Tarmo5 Skull Body Reinforced (without or with FPV cam)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My kids broke the tarmo5 skull, I had to repair it mayn times so I reinforced it. I also made a version with FPV camera.

Ocena
0 / 5
Polubienia
9
Pobrania
114
Wydruki
0
Wyświetlenia
529
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

I love the skull from flyntm. I even added a back spoiler (wing) that you kind find here : https://www.printables.com/fr/model/424220-tarmo5-mods-cover

I printed it in PLA and glued the two parts together as indicated by the author. The assembly was surprisingly stong. But my kids are really crash testing the car and the front part did not resist.

As you can see in the picture I had to glue it and I added some printed parts inside to reinforce it. If you already printed the original you can just print those 2 parts and glue it inside to reinforce your model.

  • Files : Reinforcement1.stl and Reinforcement2. stl

You can also print direcly my reinforced front part (it include the 2 reinforcements) :

  • B16-Ext_Skull_Front reinforced LT v2.stl

I also include a different remix that is made to include a FPV camera. I use a caddx ratel 2 and it fits perfectly into the skull. (see picture)

This is only the front part of the skull, you can find the other parts in the original page from flyntm here :

https://www.printables.com/fr/model/387800-tarmo5-skull-body-mount

I also broke the GEARBOX_w-SKULL that is one of the options offered by flyntm to attach the skull to the TARMO5. The walls on the sides of the 3 bolts that hold the 35cm rods are very thins and broke. I reinforced remixed a reinforced version here :

https://www.printables.com/fr/model/424220-tarmo5-mods-cover

Tagi