Milwaukee installation tool holder for Ikea Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Milwaukee installation tool holder to fit the Ikea Skadis using the T-Nuts Mounting System
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 201
- Wydruki
- 1
- Wyświetlenia
- 851
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to store the installation tools close to the drill, which is hanging from my Skadis in my Ikea Ivar. So after finding the T-Nut system I did some small modifications to the original and this is the result.
Hardware needed:
- 2x DIN 7985 TX (M2.5 x 20)
- 2x M2.5 nut
Print settings:
I used the default PrusaSlicer settings: 0.20mm 100mms linear advance. Printed with Prusament PLA in the color Galaxy black.
Print details:
Layers: 191
Model size: 210.49mm × 143.32mm × 38.20mm
Filament: 25.16m / 60.51cm³
Estimated print time: 04:30:29
side note: my printer had a layer shift, not sure why, but didn't feel like printing again as there is only a visual issue and nothing structural.