1 / 3
Milwaukee M12 battery holder for Ikea Skadis — zdjęcie 1
1 / 3

Milwaukee M12 battery holder for Ikea Skadis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Milwaukee M12 battery holder for Ikea Skadis using the T-Nut system

Ocena
5 / 5
Polubienia
80
Pobrania
544
Wydruki
5
Wyświetlenia
2538
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Another Milwaukee M12 tool related remix. As I did not want to drill this one into the wall, but I wanted to use it with my Skadis which is hanging inside my Ikea Ivar. So off to remixing this one with the T-Nuts system. Because I have 4 batteries right now I only did the double, the triple one might be added in the future.

Hardware needed:

  • 2x DIN 7985 TX (M2.5 x 20)
  • 2x M2.5 nut

Print settings:

I used the default PrusaSlicer settings: 0.20mm 100mms linear advance. Printed with Prusament PLA in the color Galaxy black.

Print details:

Layers: 135
Model size: 155.89mm × 161.38mm × 27.00mm
Filament: 22.18m / 53.35cm³
Estimated print time: 03:49:01
Last print time: 03:47:33

Tagi