1-100 Tank Leopard C1 with MEXAS (print-optimized)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Leopard 2 modified by and with something...
- Ocena
- 4,5 / 5
- Polubienia
- 26
- Pobrania
- 275
- Wydruki
- 4
- Wyświetlenia
- 1775
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tried to print this model. 100% size is far too small. I choose 150% - slicer parameter.
As I drowned in supports I made another approch: I took the bottom part of the tank and cut it in two halves. Each half could be printed flat on the heatbed. You'll need a decent amount of support anyway, I choose organic. It was kinda PITA the get those removed, but I assume ordinary support even worse.
In the end I am quite happe with this result. Larger would be better maybe. Why don't you try this?
OWL-PLA camouflage (with interchanging nuances of colors).
Printer MK3S+