Model Rocket Launch Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Launch pad for model rockets with internal power supply. Power Supply is designed for 4 18650 cells and remote control…
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 1623
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Launch pad for model rockets with internal power supply.
Power Supply is designed for 4 18650 cells and remote control switch to fire up the engine igniter.
Leading rod made with aluminium pipe 100cm length and 8mm diameter.
Tests shows that 4 cells is much more than enough, so, 3 cells will perform better, to do so just short the empty cell slot.
Launch Pad was printed in PLA. Temperature handling was proven in tests.
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Filament: PlexiWire PLA Gray Post-Printing =============
Category: Hobby