LED holder for aluminium profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount that can be attached to aluminium profile for holding LED-stripes or other things.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 499
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Holder that can be mounted onto aluminum profile and in my case hold LED rails to light the print bed.
Used on a Sovol SV04 but should fit on other aluminium profile builds as well.
I intentionally just put some holes at the ends and fitted the LED rails with zipties. This way the holder can be used for other things, too.
For mounting a M4x10 screw (with cylindric head) and a M4-T-nut is required. M3 should fit as well, for M5 you need to drill the hole to 5mm.
The span is 32cm and fits onto the printbed of a Sovol SV04, but wouldn't fit to the 25x20cm printbed of my Qidi. You can probably print it scaled down and after print extend the holes.
I printed with PETG, but PLA should also do or probably ABS/ASA even better.