Schiit Stack Holders V1 & V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two holders to keep your Schiit together.
- Ocena
- 4,846 / 5
- Polubienia
- 46
- Pobrania
- 467
- Wydruki
- 13
- Wyświetlenia
- 2158
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
The original model by fluf was good but 2mm too tall and often fell off, so I shortened it and also made a few personal tweaks. Chamfered edges, higher model resolution (the original suffered from being pretty low poly), and easier to slide on but stay on.
I have the Modi and Magni, which measure 67mm tall, with a little push I can fit this model on both sides of the stack and have it hold together firmly, while not interfering with the rubber feet.
Using Bumpmesh by CNC Kitchen, I added a slight wood grain pattern to the model, for those interested in printing it with woodfill filament.
I printed with iSanmate Sandal Wood PLA.