Schiit Stack Holders V1 & V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two holders to keep your Schiit together.
- Rating
- 4.846 / 5
- Likes
- 46
- Downloads
- 467
- Makes
- 13
- Views
- 2,158
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
The original model by fluf was good but 2mm too tall and often fell off, so I shortened it and also made a few personal tweaks. Chamfered edges, higher model resolution (the original suffered from being pretty low poly), and easier to slide on but stay on.
I have the Modi and Magni, which measure 67mm tall, with a little push I can fit this model on both sides of the stack and have it hold together firmly, while not interfering with the rubber feet.
Using Bumpmesh by CNC Kitchen, I added a slight wood grain pattern to the model, for those interested in printing it with woodfill filament.
I printed with iSanmate Sandal Wood PLA.