Stylish, modern Fruit Bowl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed in collaboration with @mani_278854. See his profile at the link in the description!
- Ocena
- 4,5 / 5
- Polubienia
- 92
- Pobrania
- 435
- Wydruki
- 6
- Wyświetlenia
- 1859
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Designed in collaboration with https://www.printables.com/@mani_278854 this is a modern fruit bowl that can be printed as separate parts and then assembled by hand.
| Print Settings | Setting |
| Walls | 2 |
| Layer Height | 0.2mm |
| Nozzle | 0.4mm |
| Material | Any filament will work (I used marble PLA) |
| Infill | 15% |
| Supports | No |
| Other | Its press fit but if you want it to be permanent then just add some glue inside the edges of the base before pressing the rib in. |
I recommend to print one base part and then a rib to make sure they fit nicely. Sizing has been tested on a calibrated Bambu X1C and an Ender 3 S1 and for both of those no scaling was needed. You can scale the rib or base size accordingly to make the fit more or less tight depending on you specific needs.
Note: If there is an interest in different sized base plates/arms or a base plate with more of less slots for the arms let me know and I will add some new versions. The current v1 uploaded version has 28 arms but if you have larger fruit only like apples for instance or similar objects then a version with less arms will work fine.