Snapper for Foldable Table (No More Squeezed Fingers)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My foldable tale always collapsed when I wanted to relocate. Reason was a missing stopper / snapper.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My foldable table always collapsed when I wanted to relocate. Reason was missing stopper / snapper. Thought I need something that holds the "scissor" in operating condition, also during moving the table. Only when storage or folding was required there should be a device that provides me an unlock device for folding the table.
Took rough dimensions, got to TinkerCad and after approx. 3 hours my V0.1 had printed the two parts. Just needed to cut-out the woodstrip for mounting the new snapper.
First shot, first hit!
What you need: Dowel pin Ø3x20mm, spring iaw. Ø6.8mm, wire 0.6, total length approx. 20mm, two (Philips-)woodscrews, few feet of filament (I chose PLA).
In the files area you may find a 16mm and a 20mm wide snapping base. I chose the 16mm base, maybe the 20mm is more rigid.