Snapper for Foldable Table (No More Squeezed Fingers)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My foldable tale always collapsed when I wanted to relocate. Reason was a missing stopper / snapper.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My foldable table always collapsed when I wanted to relocate. Reason was missing stopper / snapper. Thought I need something that holds the "scissor" in operating condition, also during moving the table. Only when storage or folding was required there should be a device that provides me an unlock device for folding the table.
Took rough dimensions, got to TinkerCad and after approx. 3 hours my V0.1 had printed the two parts. Just needed to cut-out the woodstrip for mounting the new snapper.
First shot, first hit!
What you need: Dowel pin Ø3x20mm, spring iaw. Ø6.8mm, wire 0.6, total length approx. 20mm, two (Philips-)woodscrews, few feet of filament (I chose PLA).
In the files area you may find a 16mm and a 20mm wide snapping base. I chose the 16mm base, maybe the 20mm is more rigid.