Voron Trident-R1 front WobbleX carriers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front carriers for Voron Trident-R1 made for WobbleX
- Ocena
- 5 / 5
- Polubienia
- 69
- Pobrania
- 260
- Wydruki
- 1
- Wyświetlenia
- 2188
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Trident-R1 front WobbleX carriers
CHANGELOG
01.05.2023: Opened up the center hole (where the leadscrew goes through) too 13mm to allow for more leadscrew movement without interfering witht he carrier body.
26.04.2023: Variable pin sizes for WobbleX carriers, since it's been some issues with the pin sizes being either too small or large I've made a little test model so you can determine what suits you best. When you've found the right size for you then you choose the corresponding set of carriers & TR8 adapters.
23.04.2023: Initial release.
Printing:
Default voron settings, correct orientation, no supports needed!
Bom:
2x WobbleX WS8
Stock Voron Trident screws etc.
Description:
Solid front Z carriers to be used with WobbleX WS8
Pictures:
10.5mm(old) vs 13mm(new)
- - -
In case I forget to upload any eventual updates i make to the design to Printables, the latest released version should always be avalible on my gitub!